Control And Automation

Every company seeks to improve the quality and efficiency of their day to day process or procedure in performing each task.

This need to improve efficiency create a trend in innovating Automation and Control that will fulfill the needs of each company.

To stand out from the rest Linkwise Technology Partner up with WECON, cost-effective communication, and control with high performance and dependable reliability.

Wecon Programmable logic controller (PLC) and Human Machine Interface (HMI) provides advance technology to automatically control various operating equipment with minimal or reduced human intervention. A reliable controller that will surely increase productivity, efficient use of resources, improve safety, and at the same time consistently maintain the quality of the output.

Programmable Logic Controller (PLC)

Efficiency and effectiveness have always been the top consideration in running machines and equipment. Therefore, it is needed to maintain the quality of the output, flexibility, low cost and lessen the errors and problems to be encountered.

WECON provides a Programmable logic controller (PLC) that can easily run many machines and equipment. A very accurate product which can be easily programed with less plan running cost  and low power consumption. Thus, correcting errors is extremely short and cost effective.

An all in one machine which can provide full functionality and benefits!

Transistorized Output

LX3V SERIES

Standard Programmable logic controller (PLC) which contains all general function of a Programmable logic controller (PLC).

LX3VP SERIES

Contains all function of LX3V series and provides higher speed output function.

LX3VE

Contains all function of LX3V and provides precise motion control.

LX3VM

Contains all function of LX3VM and provides a circular interpolation function.

Relay Typed Output

LX3V

Standard Programmable logic controller (PLC) which contains all general function of a Programmable logic controller (PLC).

LX3VP

Contains all function of LX3V series and provides higher speed output function

Mix Typed Output

LX3V

Standard Programmable logic controller (PLC) which contains all general function of a Programmable logic controller (PLC).

LX3VP

Contains all function of LX3V series and provides higher speed output function.

Human Machine Interface (HMI)

The HMI (Human Machine Interface) provides a textual or graphical view of system conditions and operations or vital information in a way that the user can easily understand. HMI’s offer robust monitoring, control, status reporting, data logging, and other functions.

Standard HMI

LEVI700ML

It is a 7″ HMI in TFT 800×480 pixels with 16,000k colors. It can be connected to any serial devices (RS485/RS232, with 2 built-in COM Ports).

LEVI102ML

It is a 10.2″ HMI in TFT 800×480 pixels with 65,536 colors. It can be connected to any serial devices (RS485/RS232, 1 COM Port available)

Basic HMI

PI3070N

It is a 7″ HMI in TFT 800×480 pixels with 16,000k colors. It can be connected to any serial devices (RS485/RS232, with 2 built in COM Ports) or by ethernet network. WINCE 7.0 LINUX supported.

PI3102H

It is a 10.2″ HMI in TFT 1024×600 pixels with 16,000k colors. It can be connected to any serial devices (RS485/RS232, with 2 built in COM Ports) or by ethernet network. WINCE 7.0 LINUX is optional.

Advanced HMI

PI8070

It is a 7″ HMI in TFT 800×480 pixels with 16,000k colors. It can be connected to any serial devices (RS485/RS232, upto 5 COM Ports) or by ethernet network. WINCE 7.0 LINUX supported.

PI8104

It is a 10.4″ HMI in TFT 800×480 pixels with 260,000k colors. It can be connected to any serial devices (RS485 /RS232, up to 5 COM Ports) or by ethernet network.  WINCE 7.0 LINUX supported.

High-end HMI

PI9120

It is a 12″ HMI in TFT 1920×1080 pixels with 16,000k colors. It can be connected to any serial devices (1 RS422/RS485, 2 RS485 and 2 RS232) or by ethernet network.  It supports WINCE 7.0 LINUX, mobile apps, cloud monitor, multiple users and encrypted communication.

PI9150

It is a 15″ HMI in TFT 1920×1080 pixels with 16,000k colors. It can be connected to any serial devices (1 RS422/RS485, 2 RS485, and 2 RS232) or by ethernet network.  It supports WINCE 7.0 LINUX, mobile apps, cloud monitor, multiple users, and encrypted communication.

Leak Detection System

Huge damage and loss occur most frequently when leaks are undetected over extended periods. Moreover, presence of leak can be difficult to find. This puts risks to the equipment and assets and can cause tremendous damage once left unnoticed. Therefore, a risk management is critically important to prevent such event.  

LEAK DETECTION SYSTEM is an essential component of risk management as it can detect leaks quickly, locate it accurately, issue false alarms, and work effectively under all operating conditions.

Partnered with Tracetek the pioneer of Leak Detection System, we give out a solution that will detect leaks on its early age.

A leak detection system which provides high accuracy readings once a leak has been detected and immediately alert you to prevent a bigger situation. It helps the operators responds in time to the leaks and work to its maximum efficiency.

A reliable system with proven track records in the application in offices, hotels, museums, computer rooms, data centers or other commercial buildings.

TRACETEK

Leak Detection System is an essential component of risk management as it can detect leaks quickly, locate it accurately, issue false alarms, and work effectively under all operating conditions. Partnered with Tracetek the pioneer of the Leak Detection System, we give out a solution that will detect leaks at an early age.

A leak detection system which provides high accuracy readings once a leak has been detected and immediately alert you to prevent a bigger situation. A reliable system with proven track records in the application in offices, hotels, museums, computer rooms, data centers or other commercial buildings.

WATER LEAK DETECTION

The presence of water in data centers and computer rooms can cause damage to cables, servers, and network equipment. Even just a small, unnoticed leak may cause tremendous damage to the functionality of the equipment and the data it stores. Without a water leak detection system, oftentimes problem goes undetected until it is too late.

This is why monitoring any water build-up in these areas is necessary, and a good and reliable water leak detection system is critically important.

Linkwise technology offers a water leak detection system that provides high accuracy readings once a leak has been detected and immediately alert you to prevent the bigger situation. A reliable system with proven track records in the application in offices, hotels, museums, computer rooms, data centers or other commercial buildings.

TT1000

Tracetek TT1000 sensing cables detect the presence of water at any point along their length. Installed with the Tracetek module.

TT1100-OHP

The TT1100-OHP sensor cable is designed for use on insulated  pipes. It    detects water presence at any point along their length.

TT-FLAT PROBE

The TT-FLAT PROBE is a special purpose probe designed to detect water l Leaks in specific locations.

FUEL LEAK DETECTION

Companies engaging with fuels, manufacturing or airlines are prone to safety issues most especially on how they will monitor and prevent leakage that may cause a serious problem on their day to day operation. 

Linkwise provides a Fuel Leak Detection System designed to detect fuel leak below ground or above ground, long before it became a large spill. Equipped with sensors which can pinpoint the source of the leak and respond to the source of the leak immediately. 

Accurate and reliable fuel leak detection system, that will give you security and complete assurance.

TT5000-SC

TT5000-SC is for double containment piping systems, indoor day tanks, pumps, and valve pads.

TT5000-HS

TT5000-HS is for use in slotted conduit installed below grade beside pipelines and under tank or buried valves.

TT5000-HUV

TT5000-HUV is used for the above-ground piping around tanks and other locations exposed to sunlight.

TTFFS

TTFFS-100 detects liquid hydrocarbon fuels such as naphtha, refined products and heavy crude.

CONDUCTIVE LEAK DETECTION

In some industries, water and fuel are not the only problems. Leakage of conductive liquid can also be a problem such as acid, chemicals and even hazardous waste which will severely affect the operation. Even a small leak can cause a big effect, which may result in a panic, complete shutdown of the facility, and the environmental case may be filed against the company.

Linkwise Technology provides Conductive Liquids Leak Detection System equipped with sensing cable which is dedicated to detecting early spills/leaks of conductive liquid. It has a built-in alarm that will be able to detect the location of the leak.

A cost-efficient system that will give you security and complete assurance.

TT3000

Used to detect spills and leaks of aqueous chemicals which include waste-water, acids, bases, hazardous waste streams, etc.

TT-MINI-PROBE

The TT-MINI-PROBE can also be used to detect leaks in drip trays or sumps, or low spots where TraceTek sensing cables are inappropriate.

SOLVENT LEAK DETECTION

A solvent leak can be really dangerous as it involves hazardous waste. It may put risks not just with your assets and production, but also with the safety of the people.

Solvent leak detection system is an innovative solution which detects early solvent leaks and prevent a problem that may cause a delay with the day-to-day operation.

Linkwise provides a Solvent leak detection system, equipped with reliable sensing cable, capable to detect liquid organic leak anywhere along its length but does not react in the presence of water.

It has a built-in alarm that can pinpoint the location of leak. 

A guaranteed cost-efficient solution to your problem.

TT5001

TT5001 sensing cable detects the liquid organic solvents anywhere along its length, yet does not react to the presence of water.

Installed with a TraceTek alarm and locating module, the cable senses the liquid, triggers an alarm, and pinpoints the location of the leak.

MODULES

TTSIM-1

The TTSIM-1 is a sensor interface module capable of monitoring up to 1500 meters (5000 feet) of TraceTek sensing cable. When liquid is detected.

The TTSIM-1 locates the leak and communicates the leak details to the host of monitoring system

TTSIM-2

The TTSIM-2 sensor interface module monitors up to 150 meters (500 feet) of TraceTek sensing cable. When liquid is detected, the TTSIM-2 unit indicates the leak, displays the location of the leak and switches a relay to provide local voltage-free contact closure. 

The TTSIM-2 can also communicate to a host monitoring system such as TraceTek TTDM-128 or directly to a PLC or other host system using standard protocols.

TTSIM-1A

TTSIM-1A is a primary sensor interface module with the capacity to monitor up to 150 m (500ft) of sensor cable. The output is via relay contacts and serial data.

TTDM-128

TRACETEK TTDM-128 is the primary user alarm panel and system control unit for networked Tracetek systems.

GUARDSEN

GuardSen GS-LDC-1 

GuardSen GS-LDC-1 sensing cables detect the presence of water at any point along their length. Installed with a GuardSen alarm module (GS-LDA-1), the cable senses water intrusion and triggers an alarm. It provides distributed leak detection and location over a wide range of areas.

The GS-LDC-1 sensing cables are available in a variety of lengths to provide as much coverage as needed.

GuardSen GS-LDC-2

GuardSen GS-LDC-2 sensing cables detect the presence of water at any point along their length. Installed with a GuardSen alarm module (GS-LDA-2), the cable senses water intrusion and triggers an alarm. It provides distributed leak detection and location over a wide range of areas.

The GS-LDC-2 sensing cables are available in a variety of lengths to provide as much coverage as needed.

GS-LDA-1

The GS-LDA-1 Sensor Interface Module monitors up to 500 meters of GuardSen sensing cable (GS-LDC-1). When liquid is detected, the GS-LDA-1 unit indicates the leak with an LED and switches a relay to provide local voltage-free contact closure.

The GS-LDA-1 can be used as a standalone leak detection alarm unit or can also communicate to a host monitoring system such as PLC or Monitoring System by using standard RS-485 communications.

GS-LDA-2

The GS-LDA-2 Sensor Interface Module monitors up to 1500 meters of GuardSen sensing cable (GS-LDC-2). When liquid is detected, the GS-LDA-2 unit indicates the leak, displays the location of the leak and switches a relay to provide local voltage-free contact closure.

The GS-LDA-2 can be used as standalone leak detection alarm unit or can also communicate to a host monitoring system such as PLC or other monitoring systems by using standard RS-485 protocols.

Sensors

Temperature and Humidity Sensor

Does your company have the equipment and a machine which is sensible to humid and temperature? Will you be able to check from time to time changes with the room temperature and air around it?

Most of the time these are the problem of businesses, to maintain and monitor the changes in air and temperature of the facilities. While using air-condition may give you the control with the heat and air within the room but you won’t be able to control changes in the climate outside. This may greatly affect your business once humidity and temperature were not monitored accordingly. It might affect the whole operation and will incur a big financial crisis.

PICOBOX offers not just prevention but a solution, a cost-effective answer for a long-term problem.

Temperature and Humidity Sensors that are reliable in monitoring changes in the room environment and able to send alarm once a certain change needs to be adjusted. It is designed with different features like direct visual display, high precision, low cost, aesthetic appearance, easy installation and high stability.

THS 100D

The PICOBOX THS100MD precision temperature and humidity sensor adopts the advanced chip design scheme, which is an integrated intelligent monitoring module used for ambient temperature and humidity measurement. 

This product is featured by direct visual display, high precision, low cost, aesthetic appearance, easy installation, and high stability.

FEATURES AND BENEFITS

• Built with the Swiss Sensirion high-precision integrated digital temperature and humidity chip
• Big LCD screen
• Measurement reading will not be affected by the components heat on the PCB
• Anti-electromagnetic interference
• Power supply reversed polarity protection
• Easy to install and maintain
• Celsius/Fahrenheit scale selection on the front panel

THS 100MD

The PICOBOX THS-100MD precision temperature and humidity sensor adopt the advanced Swiss Sensirion integrated chip design scheme, which is an integrated intelligent monitoring module used for ambient temperature and humidity measurement. 

This product is featured by direct visual display, high precision, low cost, aesthetic appearance, easy installation, and high stability.

It is applicable to the temperature and humidity monitoring by the government, electric sector, army, bank, telecommunication sector, education sector, hospital, airport, railway, factory, hotel, warehouse, and transport sector.

FEATURES

• Built with the Swiss Sensirion high-precision integrated digital temperature and humidity chip
• With LCD screen for visual display and easy operation
• Anti-electromagnetic interference
• Measurement reading will not be affected by the components heat on the PCB
• Power supply reversed polarity protection
• Easy to install and maintenance

Received alerts through SMS and Emails

Integration with Environmental Monitoring System

Leverage on EMS devices such as Picobox REX SMS or Email alert capabilities to monitor the fluctuation of temperature and humidity readings. Install ideally in the center of a room away from air condition/heater for maximum accuracy measurements. 

Connect the THS100D via REX analog input terminal and set the specific required temperature/humidity measurement range and associated accuracy. THS100D will notify the users via SMS/Email through an EMS device with configurable response time.

SP – 12 (SPOT SENSOR)

Water Detection Sensor

PICOBOX Water Detection Sensor (SP-12) – Water-resistant sensor specially designed to provide early detection of water sources, prevent damage and downtime from water leaks & spills around data centers, air conditioning units, chilled water piping, plumbing, and condensate lines, clogged drains, sprinkler systems, and building leaks.

SP-12 water leak detection sensor has a visual indicator that allows it to be used as a standalone device. It can be also connected to an Environmental Monitoring System where SMS and Email alert are sent when a leakage is detected.

FEATURES

• Solid chrome brass construction
• Sealed, waterproof and impact resistant
• 12 or 24VDC, 1 A output relay contact
• Fail-safe, normally closed (NC) relay contact
• Adjustable sensor height
• Visual alarm indication (2 colors LED)
• Standard 3m cable length

Received alerts through SMS and Emails

Integration with Environmental Monitoring System Users can utilize EMS devices, such as Picobox REX and FMGuard, by using its SMS and email alert capabilities to monitor any water leakage before a mishap happens. Simply place SP-12 on a flat surface near or around potential water accumulation area and connect the dry contact to the EMS device’s digital input terminal. When the water bridges the contact on the base of SP-12, an alarm is a trigger which sets off the Alarm LED and opens the normally closed contact, and at the same time, SMS or Email notification is sent.

APPLICATIONS

Data Center / Computer / Server Rooms

Banks / Hotels

Retail Shopping Centers

Libraries / Museums

Semiconductor Manufactures

Commercial Office Buildings

Educational Institutions

Generator Rooms