Temperature And Humidity Sensors

These devices are used to provide the actual humidity condition within the air at any given point and place. It is used in situations such as air conditions are extreme or need to be controlled in various reasons.

For many applications, not only humidity, but also temperature is an important factor. Therefore, there exists

a strong demand for simply-fabricated integrated humidity and temperature sensors in many fields.

In industries, humidity measurement is often important because it can affect health and safety of personnel as well as the cost of the product. As a result, temperature and humidity sensors are often quite important.

Linkwise Technology Inc. is here to provide you with our Picobox THS-103D, an indoor temperature and humidity sensor which is suitable for various intelligent building, environmental monitoring, and HVAC systems. THS-103D is designed with simple wiring and easy installation set-up. It adopts high-Performance built-in microprocessor and high-precision sensor, can meet the requirements of various high-precision and high stability measurement.

For more information, please visit us at www.linkwisetech.com

Water Leak Detection System

The presence of water in data centers and computer rooms can cause damage to cables, servers, and network equipment. 

Even just a small, unnoticed leak may cause tremendous damage to the functionality of the equipment and the data it stores.

Similarly, museums, art galleries, and document archive centers are highly sensitive to high levels of humidity. 

Long term exposure to high humidity will cause irreversible damage to properties and unimaginable losses.

Moreover, the presence of water cannot be detected easily. A perfect example is the flooding under computer raised floorings which cannot be seen as false ceiling conceals pipings above it. Condensation or leaks are discovered only when water patches are seen. Water accumulation can come from leaky pipes, seepages from adjacent walls, condensate from Air-conditioning systems, to name a few. Water can permeate to adjacent walls or downwards to the level below.

Without a water leak detection system, oftentimes problem goes undetected until it is too late. This is why monitoring any water build-up in these areas is necessary, and a good and reliable water leak detection system is critically important. 

Linkwise technology offers a water leak detection system which provides high accuracy readings once a leak has been detected and immediately alert you to prevent the bigger situation. A reliable system with proven track records in the application in offices, hotels, museums, computer rooms, data centers or other commercial buildings.

Sensors

Temperature and Humidity Sensor

Does your company have the equipment and a machine which is sensible to humid and temperature? Will you be able to check from time to time changes with the room temperature and air around it?

Most of the time these are the problem of businesses, to maintain and monitor the changes in air and temperature of the facilities. While using air-condition may give you the control with the heat and air within the room but you won’t be able to control changes in the climate outside. This may greatly affect your business once humidity and temperature were not monitored accordingly. It might affect the whole operation and will incur a big financial crisis.

PICOBOX offers not just prevention but a solution, a cost-effective answer for a long-term problem.

Temperature and Humidity Sensors that are reliable in monitoring changes in the room environment and able to send alarm once a certain change needs to be adjusted. It is designed with different features like direct visual display, high precision, low cost, aesthetic appearance, easy installation and high stability.

THS 100D

The PICOBOX THS100MD precision temperature and humidity sensor adopts the advanced chip design scheme, which is an integrated intelligent monitoring module used for ambient temperature and humidity measurement. 

This product is featured by direct visual display, high precision, low cost, aesthetic appearance, easy installation, and high stability.

FEATURES AND BENEFITS

• Built with the Swiss Sensirion high-precision integrated digital temperature and humidity chip
• Big LCD screen
• Measurement reading will not be affected by the components heat on the PCB
• Anti-electromagnetic interference
• Power supply reversed polarity protection
• Easy to install and maintain
• Celsius/Fahrenheit scale selection on the front panel

THS 100MD

The PICOBOX THS-100MD precision temperature and humidity sensor adopt the advanced Swiss Sensirion integrated chip design scheme, which is an integrated intelligent monitoring module used for ambient temperature and humidity measurement. 

This product is featured by direct visual display, high precision, low cost, aesthetic appearance, easy installation, and high stability.

It is applicable to the temperature and humidity monitoring by the government, electric sector, army, bank, telecommunication sector, education sector, hospital, airport, railway, factory, hotel, warehouse, and transport sector.

FEATURES

• Built with the Swiss Sensirion high-precision integrated digital temperature and humidity chip
• With LCD screen for visual display and easy operation
• Anti-electromagnetic interference
• Measurement reading will not be affected by the components heat on the PCB
• Power supply reversed polarity protection
• Easy to install and maintenance

Received alerts through SMS and Emails

Integration with Environmental Monitoring System

Leverage on EMS devices such as Picobox REX SMS or Email alert capabilities to monitor the fluctuation of temperature and humidity readings. Install ideally in the center of a room away from air condition/heater for maximum accuracy measurements. 

Connect the THS100D via REX analog input terminal and set the specific required temperature/humidity measurement range and associated accuracy. THS100D will notify the users via SMS/Email through an EMS device with configurable response time.

SP – 12 (SPOT SENSOR)

Water Detection Sensor

PICOBOX Water Detection Sensor (SP-12) – Water-resistant sensor specially designed to provide early detection of water sources, prevent damage and downtime from water leaks & spills around data centers, air conditioning units, chilled water piping, plumbing, and condensate lines, clogged drains, sprinkler systems, and building leaks.

SP-12 water leak detection sensor has a visual indicator that allows it to be used as a standalone device. It can be also connected to an Environmental Monitoring System where SMS and Email alert are sent when a leakage is detected.

FEATURES

• Solid chrome brass construction
• Sealed, waterproof and impact resistant
• 12 or 24VDC, 1 A output relay contact
• Fail-safe, normally closed (NC) relay contact
• Adjustable sensor height
• Visual alarm indication (2 colors LED)
• Standard 3m cable length

Received alerts through SMS and Emails

Integration with Environmental Monitoring System Users can utilize EMS devices, such as Picobox REX and FMGuard, by using its SMS and email alert capabilities to monitor any water leakage before a mishap happens. Simply place SP-12 on a flat surface near or around potential water accumulation area and connect the dry contact to the EMS device’s digital input terminal. When the water bridges the contact on the base of SP-12, an alarm is a trigger which sets off the Alarm LED and opens the normally closed contact, and at the same time, SMS or Email notification is sent.

APPLICATIONS

Data Center / Computer / Server Rooms

Banks / Hotels

Retail Shopping Centers

Libraries / Museums

Semiconductor Manufactures

Commercial Office Buildings

Educational Institutions

Generator Rooms

FDAS Monitoring System

Fire and Detection Alarm System (FDAS) is important in every building or even a simple neighborhood. This is to monitor any fire that might happen and therefore send triggers and alarms to everyone to prevent further damage and casualties. Thus, in certain cases fire was left unnoticed until it gets bigger, this will result in loss of documents, crucial equipment, files and even loss of lives. To prevent this kind of scenario, a reliable monitoring system is needed.

Linkwise provide FDAS Monitoring System which can alert the users when a certain level of fire happens 24/7, through SMS and email, anytime and anywhere

FEATURES AND BENEFITS

• 24/7 Operation.
• Send alarm and status remotely via text message and email
• Easy to install, operate and maintain.
• Remote on/off via logic expression and SMS Commands.
• No external PC or external application software required.
• Can be accessed by laptop, computer or mobile phones.
• Dedicated Stand-alone operation- full functionality controller, design with powerful and reliable features.
• Can save history status/events logs (XML/CSV Format).

Get SMS and email updates of your equipment status

Conveniently get an alert status through SMS and email. In just 2-3 seconds, you will be able to receive alarm updates when something happened to one of your equipment and therefore preventive action can be taken care of immediately. 

Facilities manager can now easily monitor the status of each device and equipment in real-time and remotely.

Stand-alone operation

It is a standalone monitoring system. Therefore, no external PC or external application software is required. Easy to set-up, operate and maintain.

Customized alerts

Early warning signs of malfunctioned equipment or damage are sometimes difficult to detect. This problem requires additional resources to find the exact abnormalities or the source of the problem.

Linkwise FDAS monitoring system will send you SMS or Email on what irregularities happened, which might be hard for a human to pinpoint in person. Making your work easier and convenient.

Low-cost with Full Functionality

A compact all in one device that provides a simple yet reliable monitoring system with just a very low cost of ownership. Designed to easily install, use and maintain with 24 /7 system operation.

Fuel Leak Detection System

Companies engaging with fuels, Manufacturing or airlines are prone with safety issues most especially on how they will monitor or prevent leakage that may cause serious problem on their day to day operation. 

Linkwise provides a fuel leak detection system designed to detect fuel leak below ground or above ground, long before it became large spill. It can pinpoint the source of leak. 

Accurate and reliable fuel leak detection system, that will give you security and complete assurance.